27 Mar 2018 - 4 min read
Auxiliary Control Construction
In my last three posts I covered the design of the auxiliary control unit which will ease entering and inspecting programs in the computer’s memory. With the design ‘in the …
07 Feb 2018 - 4 min read
Auxiliary Control Design (Part 3 of 3)
This is the last post in a mini-series of three covering the design of the auxiliary control unit which will ease entering and inspecting programs in the computer’s …
29 Jan 2018 - 12 min read
Auxiliary Control Design (Part 2 of 3)
In my last post I made a start on the auxiliary control design which once completed will make it much easier to load instructions in to memory - effectively it’s a …
24 Jan 2018 - 6 min read
Auxiliary Control Design (Part 1 of 3)
My relay computer is now at the point where it can execute a program in memory without assistance. In order to do that though, of course, the program needs to be loaded into …
29 Mar 2016 - 4 min read
User Interface Construction: Instruction, Clock and Sequencer
Well, the good news is I’ve just passed a major milestone in constructing this relay computer … it can now perform a single instruction in full firing the various …
08 Apr 2015 - 4 min read
User Interface Design: Instruction, Clock and Sequencer
Over my last seven posts I’ve been slowly putting together the card designs so that the computer will be able to operate the MOV-8, ALU and SETAB instructions. The final …
19 Aug 2014 - 2 min read
ALU & Registers A-D Test with new Display Cards
Now that the two display cards are complete enough to display and control the status of the ALU and four registers (A-D) it’s time to fit them to the upper enclosure. …
20 Jul 2014 - 5 min read
User Interface: Display B Initial Design and Construction
In my last post I put together the beginnings of the first display card … named in a brilliant flash of nomenclature as display card A. This time I’m turning my …
12 Jul 2014 - 5 min read
User Interface: Display A Initial Design and Construction
Following on from working on the main data switches in my last post this time I’ve taken the first steps in designing and constructing the first of two display cards …
05 Jul 2014 - 6 min read
Now I’ve got a fully working ALU and four registers completed I want to take a short break from card building and turn my attention to making it easier to interact with …